幸运农场

联系我们

联系人: 刘经理 手机: 15953131568        18888346536 QQ: 408031499 网址:  地址: 济南市天桥区金牛建材市场

新闻中心当前位置:首页—新闻中心

电动卷帘门的安装方法
2015-3-12 14:19:52
先在需要安装的门框框口位置画出线。表明尺寸大小,然后找工作人员设计出合适的电动卷帘门,这里值得注意的一点是框内高度比门扇的高度要高一点点。济南卷帘门厂
In the first need to install the door frame opening position of painting line. Show the size, and then find the staff to design the proper electric shutter doors, one point to note here is the frame height than the height of the doors to a little high.
第先把电动卷帘门的门框固定,这里要先拆掉门框下部的固定板。
The first electric roller shutter door frame fixing, fixing plate just want to tear down the lower part of the door frame.
注意:洞口两侧地面要预留凹槽,经校正合格后,固定木楔,门框铁脚与预埋铁板件焊牢。用水泥砂浆或强度不低于10MPa 细石混凝土嵌塞牢固即可。
Note: the hole should be reserved grooves on both sides of the ground, the well calibrated, fixed wedge, door iron feet and embedded iron parts welding. The use of cement mortar or strength of not less than 10MPa fine stone concrete impaction can be firmly.
安装电动卷帘门扇主体门扇。一定要保证电动卷帘门与墙体结成整体,封闭性要做好,再粉刷洞口及墙体。
When installing the electric rolling door body. We must ensure the electric rolling shutter door and the wall to form a whole, closed to do, then paint the hole and wall.
粉刷完毕后,门缝应均匀平整,开启电动卷帘门应该自由轻便,不得有过紧、过松和反弹现象。
After the completion of the painting, the door should be smooth, open the electric rolling shutter door should be free of light, not too tight, too loose and rebound phenomenon.
友情链接:大发彩票开户  财神汇彩票官网  盛兴彩票  鸿利彩票  大发彩票注册  云顶彩票网  金彩彩票网站  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!