幸运农场

联系我们

联系人: 刘经理 手机: 15953131568        18888346536 QQ: 408031499 网址:  地址: 济南市天桥区金牛建材市场

新闻中心当前位置:首页—新闻中心

济南卷帘门厂讲解卷帘门的操作工艺
2015-12-3 14:28:02
济南卷帘门厂讲解卷帘门的操作工艺:
Jinan explaining the operation of the shutter doors factory process:
1、卷门机必须按说明书要求安装。济南卷帘门厂
1, aus must be installed in accordance with the specifications.
2、确认门洞口尺寸及安装方式(内侧、外侧、及中间安装) ,墙体洞口为混凝土时,应在洞口预埋件, 然后与导轨、轴承架焊接连接;墙体洞口为砖砌体时,可采用钻孔埋设胀锚螺栓与导轨、轴承架连接。
2, confirm the door hole size and installation (installation of l, lateral and interte), the hole wall of concrete, should be in the mouth of the cave embedded parts, and then connected to the guide rail, bearing frame welding; When the hole wall of brick masonry, can use drilling embedding expansion anchor bolt connection with the guide rail, bearing frame.
3、卷轴、支架板必须牢固地装在混凝土结构上或预埋件上。 5 宽大门体需在中间位置加装中柱,两边有滑道。中柱安装必须与地面垂直,安装牢固,但要拆装 方便。
3, scroll, supporting plate must be firmly or embedded parts in concrete structures. 5 wide door installed in the column to be in the middle position, both sides have a slide. Installed in the column must be vertical to the ground, and firm, but to tear open outfit is convenient.
4、确定安装水平线及垂直线,按设定尺寸依次安装。槽口尺寸应准确,上下保持一致,对应槽口应 在同一平面内,然后用连接件与洞口内的预埋件焊牢。

4, determine the vertical and horizontal installation, according to the size of set installed in turn. Slot dimension should be accurate, consistent from top to bottom, corresponding slot should be on the same plane, and then use embedded parts welded fittings with the mouth of the cave.

本文由济南卷帘门厂发表提供,更多详情请关注公司网址:/

友情链接:云顶彩票网站  盛兴彩票  盛兴彩票app  盛兴彩票注册  苹果彩票登陆  大发彩票登陆  欢乐彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!