幸运农场

联系我们

联系人: 刘经理 手机: 15953131568        18888346536 QQ: 408031499 网址:  地址: 济南市天桥区金牛建材市场

新闻中心当前位置:首页—新闻中心

让你四步就完成的卷帘门维修
2018-6-6 19:52:52
一、固定在墙体上
1. Fixed to the wall
安装要求:
Installation requirements:
①、螺钉应拧紧,无松动现象。
The screws should be tightened and there is no loosening.
②、导轨、端盖板安装的尺寸误差应符合总装图上的要求。
2. The size error of the guide rail and the end cover plate should meet the requirements of the general assembly drawing.
2、将卷筒(含帘片及其附件、卷帘轴、电机及配件的组装件,用绳子系住使帘片紧绕在卷帘轴上)装入到两端板上。
2, the reel (including the curtain and its accessories, roller shafts, motor and accessories assembly, tied with a rope so that the curtain is tightly wound on the curtains shaft) and loaded onto the two ends.
操作步骤:
Operation steps:
①、将电机的方形块摆入到端盖板的方形槽中,注意电机方形块的圆孔与端盖板方形槽圆孔应在同一方向上。
1. Put the square block of the motor into the square slot of the end cover plate. Note that the circular hole of the square block of the motor and the round hole of the end cover plate should be in the same direction.

②、将托架轴的方形块摆入到端兽板的方形槽中,注意托架轴可以活动,托架轴方形块的圆孔应与端盖板上的方形块的圆孔在同一方向上。

济南卷帘门厂

The square block of the bracket shaft is placed in the square slot of the end of the beasts, and the bracket axis can be noticed to be active. The round hole of the square block of the bracket axis should be in the same direction as the square hole on the end of the cover plate.
③、将卷筒两端用开口销连接好(即方形块与方形槽的圆孔用开口销插接好)。
3. Connect the two ends of the reel with the opening pin (that is, the round hole of the square block and the square slot is inserted with the pin).
3、接通电源,调节限位。
3, connect the power supply, adjust the limit.
操作步骤:
Operation steps:
①、将系住帘片的绳子解开,并将帘片放入导轨。
First, untie the rope tied to the curtain and put the curtain into the guide way.
②、将电路系统配线插的九芯插头插入到插收盒中,将电路系统配线的四芯插头与电机出线的四芯插头对插,将电路系统配线的插头插入到市电三芯插座上。
The nine core plug inserted in the circuit system is inserted into the plug box, and the four core plug of the circuit system wiring line is inserted with the four core plug of the motor out line, and the plug of the circuit system wiring is inserted into the three core socket of the electric power system.
③、将接收盒挂在指定位置,如果配有电动开关,则将电动开关安装在距地面1.3米左右的位置(或指定位置)
3. Hang the receiver box in the specified position. If the electric switch is equipped, install the electric switch at the position of 1.3 meters away from the ground.
④、调节电机限位,下限位应在卷帘窗完全关闭位置,上限位应在底梁上行到导轨端面的位置。
4. Adjust the motor limit, the lower limit should be in the closed position of the shutter window, and the upper limit position should go up to the end face of the guide rail on the bottom beam.
4、固定罩壳、前挡板(或前扣板)。。
4, fixed cover, front baffle (or front buckle plate).
相信看了本文的济南卷帘门厂介绍后,对这方面也会有自己的一番认识,以后针对的等问题也能很好的解决。
I believe in this article, after the introduction of the Ji'nan rolling shutter factory , there will be some understanding of this aspect, and the following problems can be well solved.
友情链接:环球彩票开户  环球彩票娱乐  环球彩票投注  大发彩票  环球彩票网  苹果彩票网站  大发彩票开户  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!