幸运农场

联系我们

联系人: 刘经理 手机: 15953131568        18888346536 QQ: 408031499 网址:  地址: 济南市天桥区金牛建材市场

新闻中心当前位置:首页—新闻中心

卷帘门全玻璃活动门扇该怎么样安装?
2018-12-19 10:31:18
卷帘门全玻璃活动门扇的结构没有门扇框,门扇的启闭由地弹簧实现滚动销、地弹簧与门扇的上下金属横挡进行伎接。
There is no door frame in the structure of all-glass movable door fan of rolling shutter door. The opening and closing of door fan is realized by ground spring. The ground spring is connected with the upper and lower metal transverse bars of door fan.
(1)卷帘门划线:在玻璃门扇的下上金属横档内划线,按线固定滚动销的销孔板和地弹簧的滚动轴衔接板。具体操作可参照地弹资产品装置阐明。
(1) Scribing of rolling curtain doors: scribe in the lower and upper metal crossbar of the glass door fan, fix the pinhole plate of the rolling pin and the rolling shaft connecting plate of the ground spring according to the line. The specific operation can be explained by referring to the equipment of ground ammunition assets.
(2)确定卷帘门玻璃门扇高度:玻璃门扇的高度尺度,在裁制破璃扳时 应留意包含刺进上下横档的装置部分。一般情况下,玻璃高度尺度应小于丈量尺度5mm左右,以便于装置时进行定位调理。
(2) Determine the height of glass doors for rolling curtain doors: the height of glass doors should be measured. When cutting Glass-Breaking wrenches, attention should be paid to the device parts that penetrate the upper and lower crossbars. Generally, the glass height scale should be less than 5 mm, so as to facilitate the positioning and adjustment of the device.
把上下横档(多选用镜面不锈钢成型材料)别离装在原玻璃门扇上下两头,并进行门扇高度的丈量。假如门扇高度不足,即其上下边距门横档及地上的缝隙超过规定值,可在上下横档内加垫胶合板条进行调理。假如门扇高度超过装置尺度,只能由专业玻璃工将门扇剩余部分裁去。
The upper and lower transverse gears (mostly mirror stainless steel forming materials) are separately mounted at the upper and lower ends of the original glass door, and the height of the door is measured. If the height of the door is insufficient, that is, the gap between the upper and lower edges of the door and the ground exceeds the prescribed value, plywood can be padded in the upper and lower cross-sections for adjustment. If the height of the door exceeds the device size, only the remaining part of the door can be cut off by professional glassworkers.
(3)固定上下棋档:门扇高度确定后,即可固定上下横档,在玻璃 饭与金属横档的两头空隙处,由两头一起刺进小木条,轻敲稳定,然后在小木条、门扇玻璃及横档之间形成的缝隙中注入玻璃胶。

(3) Fixed the upper and lower chess pieces: after the height of the door fan is determined, the upper and lower crosspieces can be fixed. At the two ends of the glass rice and metal crosspieces, the two ends are pierced into the small wooden strips together, tapping stably, and then the glass glue is injected into the gap formed between the small wooden strips, the glass of the door fan and the crosspieces.

(4)卷帘门门扇固定:进行门扇定位装置。先将门框横梁上的定位销本 身'调理螺钉调出横梁平丽1~2mm,再~句'玻璃门扇竖起来,把门扇下横档内的滚动销衔接件的孔位对准地弹簧的滚动销轴,并滚动门扇将孔位套人悄轴上。
(4) Curtain door and fan fixation: the door and fan positioning device. Firstly, the positioning pin on the cross beam of the door frame itself'conditioning screw'is adjusted out of the cross beam, and then the glass door fan is erected. The hole position of the rolling pin connector in the lower cross of the door fan is aligned with the rolling pin axis of the ground spring, and the rolling door fan sleeves the hole position on the human stealth axis.
然后把门扇滚动90°使之与门框横梁成直角,门扇上横档中滚动衔接件的孔对准门框横梁上的运位销,将定位销刺进手L内15mm左右(调动定位销上的调理螺钉)。
Then roll the door fan 90 degrees to make it right angle with the door frame beam. The hole of the rolling connector in the upper crossbar of the door fan is aligned with the positioning pin on the door frame beam, and the positioning pin is penetrated into the hand L about 15 mm (adjusting the adjustment screw on the positioning pin).
(5)装置拉手:全破璃门扇上的拉手孔洞,一般是事前订购时就加工好的,拉手衔接部分刺进孔洞时不能很紧,应有松动。装置前在拉手捅入玻璃的部分涂少许玻璃胶;如若刺进过份,可在刺进部分亵t软质胶带。拉手拼装时,其根部与玻璃贴紧后再拧紧固定麟、钉。
(5) Device handles: Holes in the handles of all-broken glass doors and fans are usually processed when ordered beforehand. The connecting part of the handles should not be very tight when piercing the holes, and should be loosened. Before the device, a little glass glue is applied to the part where the glass is poked into by hand; if the glass is poked excessively, the soft t-tape can be poked into the part. When assembling hand in hand, the roots are tightened to the glass and then tightened to fix the links and nails.
以上信息是由我们济南卷帘门厂整理发布希望对大家以后的生活带来一点帮助我们的网站是:
The above inion is collected and released by our Jinan Rolling Curtain Door Factory. We hope to bring you some help in your future life. Our website is: !
友情链接:环球彩票平台  苹果彩票开户  环球彩票  盛兴彩票投注  云顶彩票平台  盛兴彩票网站  盛兴彩票app  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!